The latest from Lubinpla
More stories
-
Why coolant refractometer and titration readings disagree
Refractometer and titration readings drift apart when tramp oil, a wrong refractometer factor or aged, contaminated coolant skews one of the methods.
-
Lubricant consumption per machine: how to report it to a plant
Report lubricant consumption per machine in 4 steps: log top-ups, compare use with machine charge, flag outliers, then split customer and internal views.
-
How Many Accounts One Technical Service Engineer Can Cover
No fixed ratio exists. Count each account's visits, inquiries and test work from records, weight by complexity, and divide into available hours.
-
Joint Account Reviews: What Each Side Should Get to See
In a joint account review, the customer sees agreed results and open actions, the manufacturer gets failure and test records, sales notes stay internal.
-
What a failed test letter should tell a customer about a sample
A failed sample letter states the result against the limit, test conditions, what the failure shows and does not, the next step, and leaves out internals.
-
Measuring Technical Service Desk Time Spent on Routine Questions
Measure routine-question time by defining routine, splitting document requests from judgment questions, counting hours from records and ranking fixes.
-
Coolant sampling from a machine sump: where to take the sample
Take it from the circulating flow with the pump running, away from tramp oil and bottom sludge, and label each sample with machine, time and point.
-
How to make a metalworking fluid stable in hard water
Fix a target hardness, move emulsifiers away from calcium-sensitive soaps, add a lime soap dispersant, then test the emulsion at that hardness.
-
How to measure tool life gains from a coolant change
Define tool life first, hold tools, parts and cutting data fixed, run enough edges per coolant and log other changes. What a coolant trial can claim.
-
Replacements for Dicyclohexylamine (DCHA) in Metalworking Fluids
Match each DCHA role to a replacement: a primary amine such as AMP for pH reserve, a carboxylic acid salt for rust, a biocide for microbes, then retest.
Talk to us about your sales team.
Custom plans, custom terms, security reviews and onboarding across teams or branches. Tell us a little about your organization and we will reply with a starting plan.
Contact Sales- 01Start from site data and your documents
Bring in the TDSs, test reports and site records your team already has. Where a case has too little to go on, the agent searches the web for public sources such as manufacturer data and standards.
- 02State the case
Describe the customer's situation in plain words. The agent reads the site's conditions and history, proposes the task that fits, and starts when you say go.
- 03Review the reasoning, step by step
Each step shows what was considered, what the evidence supports and what was ruled out, with the source behind each point. You can carry on, ask for changes or stop.
- 04One document for this customer
The case ends in a document built for that customer: the conclusion, the reasoning, the conditions it depends on and what to do next. Share it through Field Care when you choose.