Lubinpla

The UN number for hydraulic oil in transport: when UN3082 applies

Summary

Only if the hydraulic oil meets the aquatic criteria for Acute 1, Chronic 1 or Chronic 2, which makes it UN3082, Class 9, packing group III (RID 2025). Hydraulic oil has no UN number of its own. Its additive package and its aquatic toxicity data decide the class, and SDS section 14 records the result per mode.

  • A mixture is Chronic 2, and environmentally hazardous for transport, when 10 times its Chronic 1 ingredients plus its Chronic 2 ingredients reach 25 percent or more (RID 2025, 2.2.9.1.10.4.6.3.2).

  • Single or inner packagings of 5 L or less of UN3082 are not subject to any other provisions of RID, under special provision 375 (RID 2025).

  • In the US, marine pollutant requirements do not apply to non-bulk packagings carried by motor vehicle, rail car or aircraft unless part of the trip is by vessel (49 CFR 171.4, 2026).

  • Section 14 of a US safety data sheet, transport information, is marked non-mandatory (OSHA 29 CFR 1910.1200 Appendix D, 2026).

When is hydraulic oil UN3082, and when is it not regulated for transport?

Hydraulic oil is UN3082 when its aquatic toxicity classification reaches Acute 1, Chronic 1 or Chronic 2 and no other hazard class applies. Below those categories it is not regulated as dangerous goods (RID 2025). Neither the grade name nor the base oil type decides it: a mineral, synthetic or vegetable-based hydraulic fluid is classified on its own data.

Packaging size and transport mode can still change the verdict. European rail, US domestic transport and sea freight each have their own small-package reliefs and marine pollutant rules.

The table below gives the transport verdict from the oil's classification, packaging and transport mode.

Condition

Verdict

Why

Classified Acute 1, Chronic 1 or Chronic 2

UN3082, Class 9, PG III

2.2.9.1.10.6 assigns UN 3082 and packing group III (RID 2025)

Classified Chronic 3, Chronic 4 or not classified

Not regulated for aquatic hazard

Only Acute 1, Chronic 1 and Chronic 2 count (RID 2025, 2.2.9.1.10.3.1)

UN3082 in packagings of 5 L or less, European road or rail (ADR, RID)

Not subject to other ADR or RID provisions

Special provision 375, if general packaging provisions are met (RID 2025); ADR 2025 carries the same special provision 375

UN3082 in packagings of 5 L or less, sea

Not subject to other IMDG Code provisions

Special provision 375 of IMDG Code Amendment 42-24, with the same packaging condition

US domestic UN3082, non-bulk, road or rail only

Marine pollutant rules do not apply

49 CFR 171.4(c)(1), unless any leg is by vessel (eCFR 2026)

Flash point or other hazard also met

Other class takes precedence

UN 3082 applies only when no other class fits (RID 2025, 2.2.9.1.10.6)

The second row settles most hydraulic oils. A product classified only as harmful to aquatic life with long lasting effects (Chronic 3) does not take UN3082.

By air, carriers apply the ICAO Technical Instructions and the IATA DGR, where UN3082 is used for a liquid that is hazardous to the environment and meets no other class (ICAO TI 2025-2026, special provision A97), with its own 5 L relief for single or inner packagings that meet the general packing provisions (special provision A197). Every mode has its own text, so check the one you ship by.

Why do two hydraulic oils of the same grade carry different UN numbers?

Transport classification follows the ingredients, not the grade, so two hydraulic oils of the same ISO viscosity grade can carry different UN numbers. RID 2025 uses a summation method, which adds up the concentrations of the classified ingredients: "A mixture shall be classified as Chronic 2 if 10 times the sum of the concentrations (in %) of all ingredients classified as Chronic 1 plus the sum of the concentrations (in %) of all ingredients classified as Chronic 2 is greater than or equal to 25%" (RID 2025, 2.2.9.1.10.4.6.3.2).

In an illustrative case, an oil with 2.5 percent of a Chronic 1 additive (M factor 1) scores 25 percent and becomes Chronic 2, so it ships as UN3082. A second oil of the same grade with 1 percent of that additive scores 10 percent and is not classified for transport. Formulators choose different antiwear, antioxidant and corrosion-inhibitor chemistries, and that alone can split two products.

When the maker has test data on the whole mixture, those data can replace the calculation, and RID accepts an EU CLP classification of Aquatic Acute 1, Chronic 1 or Chronic 2 when data for the transport criteria are not available (RID 2025, 2.2.9.1.10.5).

How do you read SDS section 14 for a hydraulic oil's UN number?

Read SDS section 14 of a hydraulic oil mode by mode. For each mode it should give the UN number, proper shipping name, transport hazard class, packing group and environmental hazards line, or state "not regulated" for that mode. These are the items OSHA lists for section 14, including "Environmental hazards (e.g., Marine pollutant (Yes/No))" (OSHA 29 CFR 1910.1200 Appendix D, 2026).

Compare section 14 with section 2 and section 12 of the same SDS. If section 2 labels the oil Aquatic Chronic 2 but section 14 shows it as not regulated, the SDS needs a reason, such as test data on the mixture or a 5 L packaging exemption.

A US SDS can also show "not regulated" for ground transport and UN3082 for sea. The US defines a marine pollutant by a list: a material in appendix B to 49 CFR 172.101 at 10 percent by weight or more, or 1 percent for severe marine pollutants (49 CFR 171.8, 2026).

In the US, section 14 is marked non-mandatory, so a blank section proves nothing. Ask the supplier instead of assuming the oil is unregulated.

Who confirms a hydraulic oil's transport classification when the SDS is unclear?

The supplier who classified the hydraulic oil confirms its transport classification, and whoever ships the oil should hold that confirmation in writing. Write to the supplier when SDS section 14 is blank, contradicts section 2, or covers only one mode. Ask for the UN number or the "not regulated" verdict for each mode, and for the basis behind it: test data, summation or CLP classification. Ask for the SDS revision date too, because a reformulated oil can change class.

The supplier's answer should give each verdict with its evidence and say plainly where the evidence is thin, much as a structured reply to a customer's supplier quality questionnaire keeps confirmed answers apart from open ones. Lubinpla drafts this kind of technical inquiry reply from the supplier's own SDS and the public criteria: it answers each item and, where the basis is thin, records insufficient evidence with a check path. For a specific consignment, a dangerous goods safety adviser can check the verdict before it ships.

Frequently asked questions

Is used hydraulic oil UN3082?

Used hydraulic oil is classified on its own composition, and contamination or additive breakdown can make that differ from the new oil. Waste rules also apply separately. Ask the waste handler for the transport classification of the waste stream rather than reusing the new oil's SDS.

Does a 20 L pail of UN3082 hydraulic oil need Class 9 marking?

Special provision 375 covers only single or inner packagings of 5 L or less (RID 2025), so a 20 L pail of UN3082 oil does not qualify for that relief. Unless another exemption applies, the pail ships under the full Class 9 provisions for that mode.

Can I copy the UN number from another brand's SDS for the same grade?

No. Two oils of the same viscosity grade can classify differently because their additive packages differ, as the summation method shows. Use the SDS for the exact product and revision you ship.

Related posts