IBC Deposits on Chemical Quotes: What the Quote Should State
Summary
A chemical quote states a returnable IBC deposit in 5 steps: separate line, tax basis, return deadline and condition, deduction rules, return freight. They cover intermediate bulk containers (IBCs) the seller or a reconditioning program takes back. The US empty standard (the residue limit) comes from 40 CFR 261.7 (as amended 2019); tax treatment varies by jurisdiction.
Under US EPA rules, a container over 119 gallons that held non-acute hazardous waste is empty once everything removable by pouring or pumping is out and no more than 2.5 centimeters (one inch) or 0.3 percent by weight of its capacity remains (40 CFR 261.7, as amended 2019).
RIBCA-NA puts 0.3 percent at about 0.8 gallons of residue in a typical 1,000 L IBC (RIBCA-NA, 2021).
One Belgian distributor requires returnable packaging back within 2 months of the delivery date (Univar Solutions Belgium, 2021).
One US IBC maker's free return program collects a minimum of 8 totes within 5 business days of the pick-up request (SCHÜTZ, 2018).
This guide covers deposits on IBCs that go back to the seller, the IBC maker or a reconditioner. It does not cover one-way IBCs sold outright or the final tax ruling for a given country, which a tax adviser should confirm.
What do you need before quoting a returnable IBC deposit?
Before quoting a returnable IBC deposit, collect four inputs: the packaging terms that set the deposit, the IBC type and capacity, the product's safety data sheet (SDS), and the return route. The deposit amount comes from the packaging owner's written terms; without them, the amount stays open on the quote.
IBC type matters. RIBCA-NA defines an IBC as a bulk packaging with a body of more than 450 L (119 gallons) and less than 3,000 L (793 gallons) (RIBCA-NA, 2021). Return programs can also exclude designs: one US program accepts only tubular steel cage IBCs and refuses wire mesh cages (SCHÜTZ, 2018).
The SDS tells you whether the residue is a hazardous material, and that decides how the empty IBC travels back. Under US EPA rules, a container that held an acute hazardous waste listed in 40 CFR 261.31 or 261.33(e) counts as empty only after triple rinsing, an equivalent cleaning method or removal of the inner liner (40 CFR 261.7, as amended 2019).
Last, find out who collects the empty IBC, since each collector sets its own acceptance rules.
How do you state a returnable IBC deposit on a chemical quote, step by step?
A returnable IBC deposit goes on a chemical quote in five numbered steps, each adding a line or clause the buyer can check against the invoice and the return.
Put the deposit on its own line: amount per IBC, number of IBCs, and the words "refundable on return".
State the tax basis of that line: whether VAT or sales tax applies to the deposit and to any separate maintenance fee or rent.
State the return window and condition: for example, return within 2 months of the delivery date, empty, sealed and undamaged, as one Belgian distributor's terms require (Univar Solutions Belgium, 2021).
State the deductions: what reduces or cancels the refund, such as residue above the empty standard, damage or missing closures, and what record of the fault the buyer receives.
State who pays return freight and on what condition, such as free collection when the pick-up coincides with an equivalent delivery (Univar Solutions Belgium, 2021).
If the deposit amount has no written source, mark it "to be confirmed" on the quote instead of entering an estimated number.
Should the IBC deposit be a separate line on a chemical quote?
Yes. The IBC deposit should be a separate line, because the deposit is refundable and the product price is not. One distributor's terms take deposits and maintenance costs into account when the packaged product is invoiced, while the returnable packaging remains the vendor's property (Univar Solutions Belgium, 2021).
Folding the deposit into the per-kilogram or per-liter price hides two facts the buyer needs: how much comes back when the IBC returns, and what the product itself costs.
It also distorts comparisons between suppliers: a quote with the deposit built in looks dearer per kilogram than one that lists it separately. Mixed bases like this are one reason a chemical quote is not comparable to a competitor quote.
Keep three items apart when the packaging terms charge them: the refundable deposit, any non-refundable maintenance or cleaning fee, and any rent per IBC. Each can carry a different tax treatment.
Show the IBC deposit both per IBC and as a total for the number of IBCs, so a partial return can be credited unit by unit.
How is VAT or sales tax handled on a returnable IBC deposit?
VAT or sales tax on a returnable IBC deposit depends on the jurisdiction and on what the charge pays for, so the quote should state the basis rather than assume it.
In the UK, HMRC's VAT manual says a container charge raised "purely to ensure the safe return of the container" and refunded on return "can be treated in the same way as a security deposit", which is not consideration (payment) for a supply. But a charge that covers loan, hire or use of the container is consideration for a service even if refundable (HMRC, 2019).
In California, Regulation 1589 states that "Deposits as defined herein are not taxable", and it treats a container as returnable when the seller keeps title to it or takes a deposit for it (CDTFA Regulation 1589, amended 2005). One Belgian distributor's terms state that packaging deposits are not subject to VAT while the maintenance cost is subject to VAT (Univar Solutions Belgium, 2021).
Other countries and US states have their own rules. Write on the quote which tax applies to each IBC line, and have a tax adviser confirm the treatment for the buyer's jurisdiction before the terms become standard.
What return conditions and deadline should an IBC deposit state?
An IBC deposit should state a return deadline counted from a named date, the empty standard, and the serviceable condition the IBC must meet. One distributor's terms set return within 2 months of the delivery date, in good condition inside and out, sealed, clean and having held no products other than those invoiced (Univar Solutions Belgium, 2021).
In the US, a container that held hazardous waste is empty once everything removable by common practices such as pouring or pumping is out, and either no more than 2.5 centimeters (one inch) of residue remains on the bottom, or no more than 0.3 percent by weight of total capacity remains for containers over 119 gallons (40 CFR 261.7, as amended 2019). On the quote, write the empty standard by its rule, not as "clean".
Serviceable condition means the IBC passes a defect list. RIBCA-NA names cage rust and broken welds, damaged pallet corners or feet, bottle punctures, cracks or residue, and closures and valves not closed for shipment (RIBCA-NA, 2021). It also lists DOT labels, marks and label plates that must stay in place (RIBCA-NA, 2021).
When is an IBC deposit reduced for residue or damage?
An IBC deposit is reduced or withheld when the returned IBC holds residue above the agreed empty standard, is damaged or is missing parts, and the quote should name each case.
One distributor's terms decommission packaging with holes, rust or damage without crediting the deposit, refuse containers holding remnants or residues, and charge the customer for missing plugs and for repairs to valves, covers and tanks (Univar Solutions Belgium, 2021).
A US IBC maker's return program charges the shipper for IBCs holding more than one gallon of residue and for IBCs received damaged or unserviceable because of rust, corrosion, or bent and broken cages or pallets (SCHÜTZ, 2018). The same program returns IBCs with hazardous residue above EPA limits to the shipper at the shipper's expense (SCHÜTZ, 2018).
To make deductions checkable, the quote should state three things for each: its basis, such as the residue limit or the defect list; whether it is a fixed charge or the cost of repair; and what evidence the buyer receives.
RIBCA-NA says a photographic record of each returned IBC that fails the return requirements should be kept by the cleaner for dispute resolution (RIBCA-NA, 2021). Ask for those photos in the deposit terms, so both sides have evidence when an IBC deposit is withheld.
Who pays the freight to return an empty IBC?
Whoever the deposit terms name pays the freight to return an empty IBC. Programs differ, so the quote should say who pays and on what condition.
One Belgian distributor collects returnable packaging free of charge when the pick-up coincides with an equivalent delivery and the packaging is grouped in the unloading area; in all other cases the customer pays the collection fees (Univar Solutions Belgium, 2021). A US IBC maker's free return program picks up a minimum of 8 totes within 5 business days of the request within the continental USA and Canada (SCHÜTZ, 2018).
In the US, return freight is also a hazardous materials question. Under 49 CFR 173.29(a), an empty packaging holding only the residue of a hazardous material ships "in the same manner as when it previously contained a greater quantity of that hazardous material" (49 CFR 173.29, eCFR as of 23 October 2026).
Section 173.29(d) excepts steel, rigid plastic and composite IBCs up to 2,100 L holding packing group II or III residue of listed hazard classes from shipping papers and placarding, under conditions that include no more than 0.3 percent residue by weight and transport only to a reconditioning, repair or disposal facility (49 CFR 173.29, eCFR as of 23 October 2026). Paragraph (d) was added by 91 FR 49340 and has applied since 3 September 2026, so return guidance written before then, such as RIBCA-NA's 2021 note, does not include it.
The quote should also name who prepares those return shipping documents.
How do you check the IBC deposit terms on a quote before sending it?
Before a quote goes out, check its IBC deposit terms against eight lines: the deposit line itself, the source of its amount, tax, deadline, empty standard, serviceable condition, deductions and return freight. For each line, the table gives the pass condition and the fix to make before sending.
Check | Pass | Fail and what to do |
|---|---|---|
Deposit line | Own line: amount per IBC, number of IBCs, "refundable on return" | Folded into the unit price: split it out |
Source of the amount | Taken from the IBC owner's written packaging terms | No written source: mark "to be confirmed", do not estimate |
Tax basis | Tax named for deposit, fee and rent separately | Blank: get the treatment for the buyer's jurisdiction from a tax adviser |
Return deadline | Period counted from a named date, such as 2 months from delivery (Univar Solutions Belgium, 2021) | "Prompt return": replace with a period and start date |
Empty standard | Named rule, such as RCRA empty under 40 CFR 261.7 stated as the 0.3 percent by weight test for containers over 119 gallons, or the IBC owner's stricter limit | "Clean" or "empty" only: cite the rule or the owner's limit |
Serviceable condition | Defect list referenced, such as the RIBCA-NA list (RIBCA-NA, 2021) | No list: attach the IBC owner's acceptance criteria |
Deductions | Each case named with its basis and a photo record | "Costs may be charged": list the cases |
Return freight | Payer, condition and shipping documents named | Silent: state who pays and who prepares the papers |
The empty standard row protects both sides most directly: a quote that cites the 40 CFR 261.7 test gives the buyer a measurable target instead of the word "clean".
Lubinpla's quote drafting follows the same rule: it states the basis of each number, such as the package unit and the deposit, and leaves a value with no source open instead of filling it with a number.
Frequently asked questions
Is an IBC deposit the same as IBC rent?
No. A deposit is refunded when the IBC comes back in the agreed condition; rent is a fee for use and is not refunded. One distributor charges both on stainless steel IBCs: a deposit and a fixed rent per IBC payable on delivery (Univar Solutions Belgium, 2021). Under HMRC guidance, a charge for hire or use of a container is consideration for a service even if refundable (HMRC, 2019).
Can a buyer return an IBC that held a different product?
Usually not, under deposit terms. One distributor requires that returned packaging held no products other than those invoiced (Univar Solutions Belgium, 2021). If the buyer reuses IBCs on site for another product, the quote should say whether the deposit lapses or cleaning is charged.
What happens to the deposit if an IBC is never returned?
The terms should say when the deposit stops being refundable, for example when the return window closes. The tax treatment can change at that point: HMRC treats a forfeited security deposit as outside the scope of VAT (HMRC, 2019), while other jurisdictions have their own rules.
Do IBCs that held hazardous products need rinsing before return?
Some do. Under US EPA rules, containers that held acute hazardous wastes listed in 40 CFR 261.31 or 261.33(e) must be triple rinsed or cleaned by an equivalent method to count as empty (40 CFR 261.7, as amended 2019). RIBCA-NA notes that California requires empty IBCs to be rinsed and drip dry regardless of the lading (RIBCA-NA, 2021). Check the SDS and the IBC owner's program rules first.