Lubinpla

Technical data sheets: whether they legally bind the supplier

Summary

Only if a data sheet's values enter the contract, order, specification or a warranty does it bind the supplier. Typical values with a disclaimer usually bind nobody. Under the Uniform Commercial Code, a description made part of the basis of the bargain creates an express warranty (UCC 2-313); the UN sales convention (CISG) and UK law have similar rules.

  • A seller does not need words such as "warrant" or "guarantee" to create an express warranty under the Uniform Commercial Code (UCC 2-313(2)).

  • To exclude the implied warranty of merchantability, the language must mention merchantability and, in a writing, be conspicuous (UCC 2-316(2)).

  • The seller must deliver goods of the quantity, quality and description required by the contract (United Nations Convention on Contracts for the International Sale of Goods, CISG, 1980, Article 35(1)).

  • In a UK sale by description, the goods must correspond with the description, and in England, Wales and Northern Ireland that term is a condition (Sale of Goods Act 1979, s.13).

When is a technical data sheet legally binding, and when not?

A technical data sheet (TDS) is legally binding on the supplier once buyer and seller make its values part of the deal. While it stays a marketing or reference document, it is information only. The table below sets out the conditions that decide whether a given TDS value binds the supplier in a business sale of a chemical product.

Condition

Verdict

Why

TDS shared for information, typical values, disclaimer, not cited in the order

Usually not binding

The sheet itself says typical properties "do not constitute a specification" (ExxonMobil, 2025)

Purchase order or contract cites the TDS by name and revision

Can bind as a description

A description made part of the basis of the bargain creates an express warranty (UCC 2-313(1)(b))

Quality agreement or sales specification lists limits and test methods

Binding for those limits

Goods must match the quality and description the contract requires (CISG, 1980, Article 35(1))

UK sale where the product is bought by its data sheet description

Implied term to correspond

Sale of Goods Act 1979, s.13(1)

Seller's terms disclaim warranties, buyer's order cites the TDS

Disputed, read together

Which terms form the contract is decided first: a definite acceptance that states different terms can still operate as an acceptance (UCC 2-207(1)), and under the CISG a reply that adds to or changes the offer is a counter-offer unless the changes are not material and the offeror does not object (CISG, 1980, Article 19). Warranty and disclaimer words are then read together (UCC 2-316(1))

Consumer sale, or a contract under another law

Outside this table

The CISG does not apply to goods bought for personal, family or household use (CISG, 1980, Article 2)

Most disputes are settled by the second row. Once an order cites the TDS, its values can become a description the goods must meet. Read the table from the top. If no row from the second onward applies, the data sheet is reference material, and the supplier's obligations come from the order and the supplier's own terms of sale.

This is general information on the UCC, the CISG and the UK Sale of Goods Act 1979, not legal advice. National law and the contract's choice of law decide each real dispute.

What does the disclaimer on a technical data sheet actually mean?

With the disclaimer, the supplier presents the numbers as typical production results, not as limits each delivery must meet. ExxonMobil states that its typical properties "are typical of those obtained with normal production tolerance and do not constitute a specification" (ExxonMobil, 2025). Dow tells specification writers that its typical values "are not intended for use in preparing specifications" (Dow, 2025), and an older Dow fluid guide adds that "Complete sales specifications are available on request" (Dow, 2001). The guaranteed limits sit in a separate document, the sales specification.

A disclaimer does not cancel everything else the seller said. Under the Uniform Commercial Code, words that create a warranty and words that limit it are read as consistent where reasonable, and the limitation is inoperative to the extent that reading is unreasonable (UCC 2-316(1)). A different question is whether a disclaimer printed on a data sheet is a term of the contract at all. That depends on how the contract was formed, and it is a question for counsel.

What happens when a customer uses technical data sheet values as the purchase specification?

If a customer treats TDS values as its purchase specification without the supplier's agreement, the customer usually carries the risk that a delivered lot differs from a typical value. ExxonMobil notes that "Variations that do not affect product performance are to be expected during normal manufacture and at different blending locations" (ExxonMobil, 2025). A lot can sit away from the typical value and still be within the supplier's sales specification.

The dispute starts at incoming inspection. The buyer rejects a lot against a typical number, the supplier points to its sales specification, and neither document was ever agreed as the limit.

The fix is a short specification that both sides sign and the purchase order cites. It lists each property with a minimum or maximum, the test method and its edition. Keep the TDS as background reading and the signed specification as the contract reference. Lubinpla's Dataroom view on a customer's account screen shows which TDS files were shared with that customer, while the values meant as the specification belong in the separate signed document.

Does a newer TDS revision change what the supplier owes?

A newer TDS revision does not by itself change what is owed under an order already placed. Changing the agreed terms takes the agreement of both parties. The Uniform Commercial Code treats such a change as "An agreement modifying a contract", which needs no consideration to be binding (UCC 2-209(1)), but it is still an agreement, not a notice from one side. The supplier can still edit the data sheet itself: ExxonMobil states that "The information contained herein is subject to change without notice" (ExxonMobil, 2025).

For the buyer, that has two practical effects. If the purchase order cited revision 3, revision 4 does not move the goalposts for that order unless both sides accept it. If the order cited no revision, the buyer may not know which values applied at the time of purchase, and any claim is weaker for it.

Cite the revision number and date in every order, store the exact file you relied on, and keep one current master per product, as described in how to build a single source of truth for product datasheets. Also ask the supplier to notify you of any change to the sales specification. The data sheet does not give you that; it is a separate commitment.

Frequently asked questions

How do typical values on a data sheet differ from guaranteed values?

Typical values describe what normal production usually gives. Guaranteed values are limits every lot must meet, usually set out in a sales specification with test methods. Dow, for example, labels its table values "Typical properties, not to be construed as specifications" (Dow, 2001). When a value matters, ask for the sales specification.

Can TDS values become an express warranty under UCC 2-313?

Yes. TDS values can become an express warranty under UCC 2-313 once they are part of the basis of the bargain, for example when the order cites them. Formal words are not needed, but "an affirmation merely of the value of the goods" or the seller's opinion does not create a warranty (UCC 2-313(2)).

Can the parties keep TDS values out of a CISG contract?

Yes, by agreeing in writing which document governs as the specification. Without that, a TDS sent before the order can count unless the contract says otherwise. Under the CISG, in determining what a party intended, due consideration is given to all relevant circumstances including the negotiations (CISG, 1980, Article 8(3)). Article 6 lets the parties vary that effect (CISG, 1980). The goods must still match the description the contract itself requires.

Related posts