The latest from Lubinpla
More stories
-
Water-Based Adhesive Froze in Transit: When It Can Still Be Used
A frozen water-based adhesive is usable only if its data sheet states freeze-thaw stability and the thawed lot passes appearance, viscosity and bond tests.
-
How to run an RO antiscalant trial with normalized flow
Log a baseline, normalize permeate flow and differential pressure, step the antiscalant dose and stop on preset limits before the RO membranes scale up.
-
How to show a water treatment chemical caused the results
To credit a water treatment chemical, fix a baseline, match periods, adjust for cycles, makeup water and load, rule out cleaning, then credit the rest.
-
Why customer sample turnaround time stretches to weeks
Customer sample tests that take weeks mostly wait between steps, not in the lab. Split turnaround into receipt, transit, analysis, review and approval.
-
AI Checks of a Certificate of Analysis Against the Specification
AI can compare a certificate of analysis to a specification item by item if units, test methods and edition match. A person judges near-limit results.
-
What a chemical management services report should show
A chemical management services report should show usage against target, inventory and expiry, SDS status, incidents and actions, not internal data.
-
Technical data sheets: whether they legally bind the supplier
A technical data sheet binds the supplier only when its values enter the contract, order or a warranty. Typical values with a disclaimer are information.
-
NSF H1 vs HT1 vs 3H: Choosing a Registration for a Food Plant
NSF H1 covers lubricants with incidental food contact, HT1 covers heat transfer fluids and 3H covers release agents. Where each fits and how to check one.
-
TDS and SDS flash points that do not match: which one to trust
A TDS and SDS flash point usually differ by open versus closed cup testing, typical versus classification values, or revision dates. Here is how to check.
-
Supplier ISO 9001 certificate expired: what to tell customers
Confirm with the certification body whether the supplier ISO 9001 certificate expired, was suspended or withdrawn, tell customers who hold it, then resend.
Talk to us about your sales team.
Custom plans, custom terms, security reviews and onboarding across teams or branches. Tell us a little about your organization and we will reply with a starting plan.
Contact Sales- 01Start from site data and your documents
Bring in the TDSs, test reports and site records your team already has. Where a case has too little to go on, the agent searches the web for public sources such as manufacturer data and standards.
- 02State the case
Describe the customer's situation in plain words. The agent reads the site's conditions and history, proposes the task that fits, and starts when you say go.
- 03Review the reasoning, step by step
Each step shows what was considered, what the evidence supports and what was ruled out, with the source behind each point. You can carry on, ask for changes or stop.
- 04One document for this customer
The case ends in a document built for that customer: the conclusion, the reasoning, the conditions it depends on and what to do next. Share it through Field Care when you choose.