The latest from Lubinpla
More stories
-
How to measure rust preventive film weight on parts (g/m2)
Weigh the coated part, strip the film, reweigh and divide the mass loss by the area. When to use test panels, gauge limits and how to set a target range.
-
Why rust preventive oil leaves stains on stored steel parts
Stains under rust preventive oil usually trace to cleaner residue, a thin or aged film, humid storage or packaging. Tell stain from rust, then check each.
-
PPAP for bulk materials: what a chemical supplier must submit
Bulk material PPAP applies only when the customer asks. The Bulk Material Requirements Checklist then sets what a chemical supplier submits and keeps.
-
Lubricant complaint samples: how much to send and how to label
Confirm the volume with the supplier lab, then send in-use and retained samples in clean bottles, each labeled with lot, product, date and complaint.
-
Wrong chemical pumped into a customer tank: what happens next
Stop the transfer, send any safety sign to site emergency response, confirm tank contents with both SDSs, isolate the tank, then find and fix the cause.
-
Technical service visit photos: what to take and how to label
Photograph equipment, product labels, storage and dosing points from fixed spots, and label each photo with location, time and photographer for the report.
-
How to write dilution instructions and a chemical dilution chart
Dilution instructions for a chemical concentrate define the ratio, give a chart by container size, set mixing order and name the strength check and PPE.
-
IBC vs drum: what to check before shipping the same chemical
Before shipping a chemical in IBC totes instead of drums, check the UN marking, HDPE compatibility, labels, customer unloading and which approvals hold.
-
Sodium hypochlorite on 316 stainless steel: when it is safe
Sodium hypochlorite is safe on 316 stainless only when dilute, alkaline, cool, brief and rinsed off. See the verdict by condition and how to confirm it.
-
How to write a cleaning procedure SOP for a parts-cleaning line
A parts-cleaning SOP sets cleaner concentration, temperature, time and mechanical action, then rinsing, drying, cleanliness checks, bath changes and PPE.
Talk to us about your sales team.
Custom plans, custom terms, security reviews and onboarding across teams or branches. Tell us a little about your organization and we will reply with a starting plan.
Contact Sales- 01Start from site data and your documents
Bring in the TDSs, test reports and site records your team already has. Where a case has too little to go on, the agent searches the web for public sources such as manufacturer data and standards.
- 02State the case
Describe the customer's situation in plain words. The agent reads the site's conditions and history, proposes the task that fits, and starts when you say go.
- 03Review the reasoning, step by step
Each step shows what was considered, what the evidence supports and what was ruled out, with the source behind each point. You can carry on, ask for changes or stop.
- 04One document for this customer
The case ends in a document built for that customer: the conclusion, the reasoning, the conditions it depends on and what to do next. Share it through Field Care when you choose.