접착제·실런트·조립 보조제
접착제·실런트·조립 보조제 분야는 부품을 붙이고, 밀봉하고, 고정하는 제품을 다룹니다. 산업용 접착제, 나사 고정제, 고착 방지제, 가스켓, 건축·조인트 실런트입니다.
산업용 접착제와 접착
-
Cyanoacrylate vs Epoxy: Gap, Speed, Strength and Temperature
Cyanoacrylate fits small, tight parts that fix in seconds; epoxy fits load-bearing, gap-filling joints in heat or chemicals. Values and when to switch.
-
Epoxy vs Polyurethane Adhesive: Strength, Flexibility and Use
Epoxy adhesive suits rigid, strong, hot metal joints; polyurethane suits flexible joints under impact or vibration. Values, test methods, when to use each.
-
How to Choose a Structural Adhesive for Bonding Metal Parts
Choose a toughened epoxy for high load or heat on metal and a methacrylate for oily or lightly prepared surfaces. Conditions, ranges, supplier questions.
건축·조인트 실런트
-
Silicone vs Polyurethane Sealant: Which Building Joint Fits
Silicone suits glazing and metal joints, polyurethane suits paintable concrete and floor joints. Property table and why service life figures differ.
-
Why Silicone Sealant Is Not Curing and How to Fix It
Silicone sealant that stays tacky usually has expired stock, cold or dry air, a thick bead or a dirty surface. Field checks to tell the causes apart.